10 Inch Stainless Steel Submersible Pumps (50/60 Hz)
10” Stainless Steel (AISI-304) Submersible Pumps: Best for Industrial, commercial, construction, mining activities, Livestock watering, water transport solutions, etc.
These Pumps are created with the intent of being immersed right under the water. Unnati Pumps 10-inch stainless steel submersible pumps are available in single-stage or multistage designs and come with mixed-flow impellers for higher flow requirements. These multi-stage submersible pumps are appropriate for wells with a diameter of at least 10′′ with mixed flow impellers made of various materials.
10 inch Stainless Steel Submersible Pumps are made to function effectively and reliably and to offer a long, trouble-free lifespan. They are propelled by a water-filled, rewindable submersible motor for continuous operation. Also, the premium shaft bearings attached to the pump offer exceptional wear resistance and reduced friction.
Performance Range
Flow range:- Max. 280 M3/h
Head range:- Max. 505 m
Special Construction on request
Also available in stainless steel AISI 316 Material
Also available with NPT thread pipe connection.
Spec
Submersible Pumps for deep wells of 10″(DN250mm).
Size for connection to the motor accorinding to NEMA Strandards up to 8″ motor joining
Delivery Casing with built-in return valve.
All standard pumps are completely manufactured out of stainless steel AISI 304 Sheet Metal.
Impeller : Mixed Flow Impellers – USP 125 , USP 160, USP 215
Connection: Screwed pipe Connection with BSP Thread as standard
Materials
| Post. | Component | Material |
|---|---|---|
| 1 | Bowl/Diffuser | Stainless Steel AISI 304 |
| 2 | Impeller | Stainless Steel AISI 304 |
| 3 | Neck ring | NBR |
| 4 | Shaft | Stainless Steel AISI 431 |
| 5 | Couple | Stainless Steel AISI 316 |
| 6 | Delivery Casing | Stainless Steel AISI 304 |
| 7 | Suction Case | Stainless Steel AISI 304 |
| 8 | Bearing Bush | NBR |
| 9 | Strainer | Stainless Steel AISI 304 |
Operating Conditions
Liquid temperature : 0’C to +45’c
Max. Sand content into the water : 50 g/m3
Max. Start per Hour: 20 at regular intervals
Direction of rotation : Clockwise as seen from the pump coupling side.
